Microlon Lubricants & Greases

Microlon Family of Products

Microlon Precision Oiler

Microlon Precision Oiler
Microlon is proud to announce the creation of a new product, the Microlon Precision Oiler. This product combines the Microlon resin with a light weight oil to open endless possibilities and new applications. This Microlon product is not harmful to plastics and is good for any surface where you need friction reduced.

The Microlon Precision Oiler is not intended to be used anywhere there is combustion. The Microlon Precision Oiler is intended to be used in fishing reels, on bearings, on threaded parts, on chainsaws and bike chains, on the bearing surfaces of aluminum window frames and more. The Microlon Precision Oiler is great for the chain, rollers, tracks and hinges in garage doors, the oil is comparable with the tennifer process used to lubricate the slides on Glocks. Without the cleaning complex, the Microlon Oiler will leave behind a little light weight oil, so be sure to wipe away the excess oil to keep from attracting dust and grit, the injector tip makes this oiler ideal for getting into hard to reach places. The Microlon Precision Oiler is inexpensive, portable and easy to use.
Price: $7.95 Quantity:

Microlon Racing Formula

16oz Racing Formula
Microlon 16 OZ Racing Formula is a special Microlon formulation optimized for high performance racing vehicles that operate at higher compressions, operating temperatures and RPMs. This formulation provides extra active fractured resin particulate to form a thicker "Microlon film" on metal surfaces for the ultimate in friction reduction. The result is increased performance, lower operating temperatures and longer usable life for moving internal engine parts under severe stresses.
Price: $219.95 Quantity:

Microlon Chassis Grease

14 oz Chassis Grease
Microlon Chassis Grease is a high quality, high performance grease. Microlon Chassis Grease is engineered to dramatically reduce friction and wear in all chassis lubrication applications including drag links, ball joints, king pins, universal joints, idler arm bearings, and fifth wheel faceplates and pivots. Microlon Chassis Grease far exceeds NLGI GC - LB requirements in the area of EP and rust prevention.
Price: $29.95 Quantity:

Microlon Heavy Duty Grease

14 oz Heavy Duty Grease
A versatile, heavy duty grease with extreme water resistance and adhesive properties. Excellent for marine applications, fifth wheel lubrication, exposed gears, chain and sprockets; any extreme service in wet, muddy or dusty conditions. Unbeatable for use on boat trailer wheel bearings. Microlon Heavy Duty Grease is engineered to dramatically reduce friction and wear in all chassis lubrication applications including drag links, ball joints, king pins, universal joints, idler arm bearings, and fifth wheel faceplates & pivots.
Price: $29.95 Quantity:

Microlon Wheel Bearing Grease

4 oz Wheel Bearing Grease
Microlon Wheel Bearing Grease is simply the best extreme pressure wheel bearing grease anywhere. It has perfect consistency, fibrous texture and contains the highest quality rust and oxidation inhibitors. It provides excellent water resistance and forms a super-lubricant Microlon film on bearings and metal surfaces for reduced friction and wear.
Price: $19.95 Quantity:

Microlon Assembly Lube

Assembly Lube
Microlon Assembly Lube should be used on all moving parts during assembly. Lightly coat all bearings, shafts, bushings, sleeves, piston rings, ring lands, pistons, cylinder bores, wrist pins, valve stems, valve guides, timing chains, gears, camshaft lobes, rocker arms, pushrod ends and anywhere metal-to metal contact occurs. Microlon Assembly Lube provides excellent rust and corrosion protection for long-term storage after assembly. It will not run off during storage and protects against dry-starts when the unit is returned to service. Because Microlon reduces friction in close fits, it will prevent many seizing and galling problems.
Select: Quantity:

Microlon Power Steering Treatment

2oz Power Steering Treatment
Microlon PST Power Steering Treatment smooths and quiets the operation of your power steering unit by reducing friction. The reduced friction helps to reduce maintenance and extends the life of your power steering unit. The 2 Fl OZ (59 ml) can treats standard power steering units in all domestic and foreign automotive vehicles and light trucks.
Price: $8.95 Quantity:

Microlon Automatic Transmission Treatment

8oz Automatic Transmission Treatment
Microlon Automatic Transmission Treatment is a specially formulated metal treatment for automatic transmissions. It reduces performance-robbing and wear-causing friction on the metal surfaces in your transmission without affecting the fibrous surfaces where friction is required for proper operation. Microlon contains the highest quality cleaning agents, corrosion inhibitors and antioxidants. Microlon cleans the microscopic metal pores and imperfections of varnish and other deposits. Then it impregnates and coats the metal surfaces with a durable micro-thin dry super-lubricant film for reduced metal to metal friction and noticeably smoother operation. It also protects against corrosion and scale. You only need to treat your transmission once to reduce maintenance and extend the life of your transmission.
Price: $29.95 Quantity:

Microlon Racing Formula

Compound 90 Gear Treatment
Microlon Compound 90 is a specially formulated metal treatment for manual transmissions, transfer cases and differentials. It reduces performance-robbing and wear-causing friction on gears and other metal surfaces. Compund 90 treats the metal surfaces with a durable micro-thin dry super-lubricant film for reduced friction and noticeably smoother operation. It also protects against corrosion and scale. You only need to treat your manual transmission or differential once to reduce maintenance and extend their life.
Select: Quantity:

Microlon Sportsman's Kit

5 oz Aerosol Microlon Liquid
Microlon Aerosol Liquid contains the highest quality cleaning agents, corrosion inhibitors and antioxidants. These ingredients combine to prepare the pore structure to receive the Microlon Metal Treatment and provide lasting protection. The aerosol treatment is simple and easy to apply. Simply spray on mechanical mechanisms or devices for smoother operation.
Price: $19.95 Quantity: